Odin® Darley Autovalve™ Kits
The Autovalve™ is a user programmable valve system to be used in Compressed Air Foam systems, powered by 12 volt or 24 volt battery power. The Autovalve™ shall have predetermined flow settings for a water and air valve by operation of the flow buttons. The system shall operate several modes of flow choices:
Features AutoValve™ Standard: Controller with wiring harness Stainless steel solution valve and actuator Stainless steel air valve actuator Instruction manual Kits available in 11/2”, 2”, 21/2” & 3” AutoValve™ Expanded: Controller with wiring harness Stainless steel solution valve and actuator Stainless steel air valve actuator 300 psi stainless steel foam solution check valve Stainless steel bushing type air check valve Instruction manual Kits available in 1½”, 2”, 2½”*, 3”* Check valves included Technology The Autovalve™ shall have a “Slug Flow Interlock” safety feature which is designed to prevent the slug flow that occurs when water and air are mixed in a CAF system without foam concentrate. This requires a signal from the foam concentrate proportioning system (Foam Pro 2001) to enable the “DRY C.A.F.” and “WET C.A.F.” operational modes. If the proportioner signal is not present when engaging the “DRY C.A.F.” or “WET C.A.F.” modes, the system will automatically engage the “WATER” mode An optional pressure transducer shall be available and designed to send pressure signals to the digital display of the Autovalve™ controller. It can display in either “bar” or “psi”. The sender shall be all stainless steel and rated to 1000 psi. It shall be thermally stable at all common flow temperatures of a fire truck and be accurate to 1% of the actual pressure. Options 18' extension cable, foam solution valve, 8' extension cable, air valve, Pressure transducer for displaying discharge pressure
Apply to be a Tax Exempt Entity
Have us help you decide
Put in a request for information below and we'll get back to you as soon as possible.